Pure Moly Rod - Ground & Polished Molybdenum Rod (h8/h9 Tolerance)
Kingdon supplies pure moly rod in ground and polished condition for precision assembly. Machined from 99.95% molybdenum to GB/T 4188 and ASTM B387, our rods hold h8/h9 shaft tolerance (down to 0.014 mm on Ø3 mm) with surface roughness Ra ≤ 1.6 µm and straightness within 0.5‰ of length. Diameters 0.8–120 mm, custom lengths, free samples, quotations within 24 hours. MOQ 1 pc.
| Purity | Tolerance | Surface Roughness | Straightness | Diameter | MOQ |
|---|---|---|---|---|---|
| ≥ 99.95% Mo | h8 / h9 | Ra ≤ 1.6 µm | ≤ 0.5‰ of length | 0.8 – 120 mm | 1KGS |

Why Ground & Polished Moly Rod
Precision Moly Rod, Not Just Bar Stock
Black (as-forged) molybdenum rod is sold by weight and dimension range - it is meant for further machining. Ground and polished molybdenum rod is a finished precision product: the diameter is ground to a controlled shaft tolerance, the surface is free of scale, and the rod is straightened so it can be assembled directly into vacuum equipment, furnace hardware, and precision instruments.
If your drawing calls for a fit - h8, h9, or a tight ± tolerance - this is the page you need. Tell us the diameter and the required limits and we will confirm what we can hold before you order.
Molybdenum Rod Finish Options
| Finish | Surface | Tolerance (typical) | Surface Roughness | When to Choose |
|---|---|---|---|---|
| Black (as-forged/sintered) | Oxidized, dark surface | ± 1.0 – 2.0 mm | - | Further machining in your own shop; lowest cost |
| Alkali washed | Cleaned, oxide removed | ± 1.0 mm | - | Vacuum use where outgassing matters |
| Lathed (machined/peeled) | Bright, visible turning marks | ± 0.2 mm | Ra ≈ 3.2 – 6.3 µm | General machined condition; large diameters |
| Ground | Uniform, fine grinding pattern | h8 / h9 or ± 0.02 mm | Ra ≤ 1.6 µm | Precision assembly, electrode shanks, vacuum components |
| Polished | Bright, mirror-like | h8 / h9 | Ra ≤ 0.8 µm | Visible parts, clean/optical environment, low outgassing |
Pure molybdenum rods are available in different surface and machining conditions. Final dimensions and tolerances depend on the selected diameter, finish and delivery condition.
Tolerance Capability: h8 / h9
We grind molybdenum rod to h8 and h9 shaft tolerance to ISO 286. Because "h" sets the upper deviation at zero, the rod is always at or below nominal - the size your assembly needs. The table below shows the limits we can hold by diameter range.
| Diameter Range | h8 (mm) | h9 (mm) |
|---|---|---|
| 0.8 – 3 mm | 0 / −0.014 | 0 / −0.025 |
| > 3 – 6 mm | 0 / −0.018 | 0 / −0.030 |
| > 6 – 10 mm | 0 / −0.022 | 0 / −0.036 |
| > 10 – 18 mm | 0 / −0.027 | 0 / −0.043 |
| > 18 – 30 mm | 0 / −0.033 | 0 / −0.052 |
| > 30 – 50 mm | 0 / −0.039 | 0 / −0.062 |
| > 50 – 80 mm | 0 / −0.046 | 0 / −0.074 |
| > 80 – 120 mm | 0 / −0.054 | 0 / −0.087 |
Other Precision Parameters
| Parameter | Capability |
|---|---|
| Straightness | ≤ 0.5‰ of length for Ø > 0.8 mm (per GB/T 4188); tighter on request |
| Roundness / ovality | ≤ half of diameter tolerance |
| Surface roughness | Ra ≤ 1.6 µm (ground, standard) · Ra ≤ 0.8 µm (polished) |
| Ends | Cut square, chamfered, or threaded to drawing |
| Length | To order |
| Inspection | Micrometer (0.002 mm) for Ø < 30 mm; caliper (0.02 mm) for Ø ≥ 30 mm |
Grades
| Grade | Type | Typical Use |
|---|---|---|
| Mo1 / Mo2 | Pure molybdenum, Mo ≥ 99.95% | General high-temperature parts, electrodes, vacuum components |
| MH1 | Doped / high-temperature molybdenum grade | Higher recrystallization temperature components |
| MoLa (lanthanum-doped) | La₂O₃ doped - per GB/T 4188-2017 grade system | High-temperature furnace parts, better creep resistance |
| TZM | Mo-0.5Ti-0.1Zr-0.02C | Highest strength and creep resistance at high temperature |
Chemical Composition (Mo1, typical max %)
| Element | Fe | Ni | Al | Si | Mg | C | N | O | Mo |
|---|---|---|---|---|---|---|---|---|---|
| Max % | 0.010 | 0.005 | 0.002 | 0.010 | 0.005 | 0.010 | 0.003 | 0.008 |
≥ 99.95
|
Material Grade and Chemical Composition
This product page focuses on commercially pure molybdenum rods. Mo1 and Mo2 grades can be supplied according to confirmed material specifications.
For orders requiring a specific chemical composition, customers can provide the applicable standard or impurity limits for review before production.
MoLa, TZM and other alloyed molybdenum materials are handled separately because their chemical composition and performance requirements differ from pure molybdenum.
Manufacturing and Machining
Molybdenum rods can be processed through forming, sintering and subsequent machining operations, depending on the required size and delivery condition.
Available finishing operations include turning, grinding, polishing, straightening and end machining. Custom end conditions can be reviewed against the supplied drawing.
Machining requirements should specify the final diameter, length, tolerance, surface finish and any additional features such as chamfers, threads or drilled holes.
Applications
Pure molybdenum rods are supplied for machining into components used in high-temperature and vacuum-related equipment.
Vacuum Furnace Components
Rod stock for furnace supports, fixtures, structural parts and other machined components used in vacuum or protective-atmosphere equipment.
Glass Melting Equipment
Molybdenum rod for electrodes and related components used in glass melting systems. Material selection should consider glass composition and operating conditions.
Electrical and Vacuum Components
Precision rod stock for electrical contacts, vacuum equipment components and other parts requiring specified dimensions and surface conditions.
Semiconductor and Industrial Equipment
Machined molybdenum components for vacuum systems and industrial equipment, subject to drawing and material requirements.
Quality Inspection and Dimensional Control

Inspection requirements can be defined according to the rod diameter, tolerance class, surface finish and application.
Typical inspection items include:
- Diameter measurement
- Length measurement
- Straightness inspection
- Roundness or ovality checks, where specified
- Surface roughness measurement
- Chemical composition verification according to the material grade
Inspection instruments and acceptance criteria should be agreed upon before production. Material documentation can be provided according to the confirmed order requirements.
Custom Molybdenum Rod Machining
KDMET reviews custom molybdenum rod orders according to the required material grade, dimensions and machining details.
Please provide the following information when requesting a quotation:
- Material grade
- Nominal diameter
- Required length
- Tolerance class or dimensional limits
- Surface finish
- Straightness and roundness requirements
- End machining requirements
- Order quantity
- Technical drawing or specification
The production team can review the drawing, confirm machining feasibility and provide the quotation and estimated delivery schedule.
Hot Tags: pure moly rod, China pure moly rod manufacturers, suppliers, factory, Molybdenum Bar, molybdenum 98, molybdenum 100, Molybdenum Threaded Rod, Pure Moly Boat, molybdenum 92








