sales@kdmet.com    +86-13973320996
Cont

Have any Questions?

+86-13973320996

TZM Material
video
TZM Material

TZM Material

TZM Molybdenum Alloy is available as disc, granules, ingot, pellets, pieces, powder , rod, wire, tube, sputtering target and in numerous other forms and custom shapes. TZM is Molybdenum's prime alloy and is an alloy of titanium, zirconium and carbon. TZM is stronger than Molybdenum alone withstanding temperatures over 1300 °C and provides better weldability and overall strength.
Send Inquiry

Product Introduction

Specification

 

TZM Molybdenum Alloy is available as disc, granules, ingot, pellets, pieces, powder , rod, wire, tube, sputtering target and in numerous other forms and custom shapes. TZM is Molybdenum's prime alloy and is an alloy of titanium, zirconium and carbon. TZM is stronger than Molybdenum alone withstanding temperatures over 1300 °C and provides better weldability and overall strength. TZM Alloy is generally immediately available in most volumes. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

 

TZM Molybdenum Properties and Appearance

 

 

With a melting point of 2,623 degrees Celsius (4,753 F) it is used in high temperature applications. TZM has a silvery white appearance, with a hint of gold luster and is part of the corrosion-resistant and high-temperature group.

 

TZM is more expensive than pure molybdenum, however in appropriate applications this is justified by its increased strength at greater temperatures, a higher recrystallization temperature, improved hardness and good ductility. TZM also exhibits excellent corrosion resistance, making it ideal for use in chemical processing plants as well as the oil and gas industries, whilst its thermal stability and electrical conductivity makes TZM a useful alloy in the semiconductor industry.

 

In elevated temperature applications, TZM's higher strength, hardness, creep resistance and ductility ensure it will not weaken or soften. In addition, TZM demonstrates good thermal conductivity, low vapor pressure and is machinable. TZM is recommended for high-strength, high-temperature structures and applications operating between 700 and 1,400 degrees Celsius. It is less prone to delaminating, cracking or breaking compared to pure molybdenum under these extreme conditions. However, like pure molybdenum, TZM begins to oxidize at 400 degrees Celsius and oxides rapidly in atmospheres above 500 degrees Celsius. Despite being similar in strength to pure molybdenum at room temperatures, at high temperatures, exceeding the recrystallization temperature of pure molybdenum (900 to 1,100 degrees Celsius), TZM is much stronger. In load-bearing applications exceeding 1300 degrees Celsius, TZM is twice as strong as pure molybdenum.

 

TZM is commonly produced by powder metallurgy or arc-cast processes via progressive powder metallurgy techniques with the addition of particle-strengthened carbides and oxides to inhibit grain growth at elevated temperatures. This combination increases the ductility and creep strength of the alloy.

 

TZM Molybdenum Applications

 

TZM is commonly used in rocket nozzles, vacuum furnace components, die inserts, heat shields, jet engine exhaust cones, fuel cells, anodes in X-ray tubes, gas pipelines, annealing and sintering, light-alloy casting molds and high temperature structural parts. TZM is useful where demanding mechanical load at temperatures above 900 degrees Celsius, or when recrystallization and embrittlement of pure molybdenum is a concern due to repeated temperature cycling and handling. Industries where TZM is used include:

  • Aerospace Industry
  • Defence Industry
  • Automotive Industry
  • Nuclear Industry
  • Semiconductors Industry
  • Power generation Industry
  • Metalworking Industry
  • Electronics Industry

 

06
05
04
01
02
031

About Zhuzhou Kingdon Industrial & Commercial Co.,Lt

gate1

Since our establishment in 2004, we are always dedicated to manufacutring high quality tungsten and molybdenum products. Now our oversea marketing network spread in USA,UK,Germany,India, Germany, Brazil, ,Poland,CZ,Slovenia,Singapore and etc.

Customer Service
Zhuzhou Kingdon Industrial & Commecial Co.,Ltd offers mature customized service supported by our technician. Also,we can help customer choose raw material according to customer's appication.We offer 24/7 customer service.

 

Why Choose Us?

 

1

We have advanced equipments and high technology .

2

We can provide customized products for customers.MOQ is 1pc or 1kg.

3

Our Mature technology and superior service provide you exquisite packaging and quick delivery.

4

We are always highly honoured by customers due to our quality prodcuts and competitive prices.

5

We have good after-service for replacement.

 

How to place your order

 

1

Send us your order list (models/quantities/colors)

2

we will send you PROFORMA INVOICE (PI) with shipping cost and Payment information for your confirmation.

3

You arrange payment after you confirmed proforma invoice, we will arrange production after received your payment notice.

Specific delivery date depends on your specific needs, normally delivery in 1-3 days.

4

We will arrange delivery after your payment arrived and goods ready,and at the same time we will tell you goods tracking number so that you could know your goods condition by this number from courier site.

5

You will receive your order in about 3-5 days after goods ship out.

 

FAQ

 

If you have any others question ,please contact us and we will give you prompt response!

01

01.What is your main product?

The main product are Tungsten and Molybdenum including their alloy products and their deep processing products such as wire,filament,rod,bar,sheet and customized parts.

02.What is about your general delivery date?

Nomally 10-20 workdays .

03.What is your packing?

We use standard export packing of carton and plywood box.

04.Can I get the samples?

Sure, contact us directly.

Hot Tags: tzm material, China tzm material manufacturers, suppliers, factory, tzm molybdenum, mo molybdenum, moly wire, TZM Molybdenum Rod, mineral molybdenum, disk tzm

Send Inquiry

(0/10)

clearall